HARDWARE
Power & Signal Integrity for Board Design Using HyperLynx
Nº
556
DATE: CALL
PRICE NIS: 5040 + VAT
DURATION: 3 Days
DATE: CALL
PRICE NIS: 5040 + VAT
DURATION: 3 Days
Course Overview:
Learn when and how to apply power & signal integrity techniques to high-speed interfaces between components. This comprehensive course combines design techniques and methodology with relevant background concepts of high-speed bus and clock design, including transmission line termination, loading, and jitter.
You will work with IBIS models and complete simulations using Mentor Graphics HyperLynx. Other topics include managing PCB effects and on-chip termination. This course balances lecture modules with instructor demonstrations and practical hands-on labs.
You will work with IBIS models and complete simulations using Mentor Graphics HyperLynx. Other topics include managing PCB effects and on-chip termination. This course balances lecture modules with instructor demonstrations and practical hands-on labs.
Level:
Connectivity 3
Who should attend?
Digital designers, board layout designers, or scientists, engineers, and technologists seeking to implement Xilinx solutions. Also end users who want to understand how to implement high-speed interfaces without incurring the signal integrity problems related to timing, crosstalk, and overshoot or undershoot infractions.
Prerequisities:
- Familiarity with high-speed PCB concepts
- Basic knowledge of digital and analog circuit design
- ISE® tool knowledge is helpful
Software Tools:
Mentor Graphics HyperLynx 8.0 or later
Skills Gained:
After completing this training, you will be able to:
- Describe signal integrity effects
- Describe power integrity effects
- Predict and overcome signal integrity challenges
- Simulate signal integrity effects
- Verify and derive design rules for the board design
- Apply signal integrity techniques to high-speed
- Supply the FPGAs with power
- Handle thermal aspects
Course Outline:
Part 1 – Signal Integrity
1. Signal Integrity Introduction2. Transmission Lines
3. IBIS Models and SI Tools
Lab 1:Invoking HyperLynx
4. Reflections
Lab 2:Reflection Analysis
5. Crosstalk
Lab 3:Crosstalk Analysis
6. Signal Integrity Analysis
7. Signal Integrity Summary
Part 2– Power Integrity
8. Introduction to PDN Design9. Power Distribution Vias, Planes, Bypass Capacitors
10. Capacitors and mounting inductance
11. Spreading inductance in planes
12. Capacitor value selection is important
13.Designing for Acceptable Ground Bounce/SSO/SSN
14. DC/DC Power Supply: Switching vs. non-Switching
15. Power Supply Issues in the real world
Lab 4:Power Prediction
16. Power Summary
Part 3 – Board Design
17. Board Design Introduction18. Signal Interfacing: Interfacing in General
19. Signal Interfacing: FPGA-Specific Interfacing
Lab 5: I/O Pin Planning
20. Die Architecture and Packaging
21. PCB Details
22. Thermal Aspects
Lab 6: Thermal Design
23. Tools for PCB Planning and Design
24. Board Design Summary
Lab Descriptions
Lab 1: Invoking HyperLynx – Become familiar with signal integrity tools. Use HyperLynx for schematic entry, modeling, and simulation. Modify a standard IBIS model to define a driver and then use its stackup editor to define a PCB.Lab 2: Reflection Analysis – Define a circuit and run various simulations for effects of reflection.
Lab 3: Crosstalk Analysis – Using simulation, analyze circuit topology and PCB data for strategies to minimize crosstalk.
Lab 4: Power Prediction – Estimate initial power requirements using an Excel spreadsheet, then use XPower Analyzer to accurately predict board power needs.
Lab 5: I/O Pin Planning – Use the PlanAhead software to identify pin placement and implement pin assignments.
Lab 6: Thermal Design – Determine maximum junction temperature and calculate acceptable thermal resistance
