עיצוב FPGAs באמצעות Vivado Design Suite 3

טכניקות סגירה בתזמון ואופטימיזציה.

מי שמבין, יודע

קורס זה ילמד אותך כיצד להשתלט על סגירת תזמון באמצעות יישום אילוצי תזמון, שימוש בטכניקות, אופטימיזציה של קידוד HDL, שימוש בגישות עיצוב סינכרוני, ניתוח דוחות תזמון, בחינת אפשרויות הטמעה מתקדמות ושימוש ב-Tcl scripting עבור זרימות אצווה שאינן פרויקט.

אורך הקורס: 3 ימים

מחיר הקורס: 6,229 ש"ח

תאריך פתיחת הקורס: 11/03/2024

להרשמה Syllabus PDF

Course overview

You will learn to effectively employ timing closure techniques by applying basic timing constraints, demonstrating timing closure techniques such as baselining, pipelining, and synchronization circuits, showing optimum HDL coding techniques that help with design timing closure, using synchronous design techniques, Reviewing, and analyzing timing reports for a design, employing advanced implementation options, using Tcl scripting in non-project batch flows.

This course builds further on the previous Designing FPGAs Using the Vivado Design Suite 2.

Level:

FPGA 3

Who should attend?

FPGA designers with intermediate knowledge of HDL and FPGA architecture and some experience with the Vivado Design Suite

Prerequisite:

Intermediate HDL knowledge (VHDL or Verilog)
Solid digital design background
Designing FPGAs Using the Vivado Design Suite 2 course (recommended

Software Tools:

Vivado Design Suite 2021.1

Skills Gained: After completing this training, you will be able to:

Apply timing exception constraints in a design as part of the Baselining procedure to fine tune the design
Apply clock and I/O timing constraints and perform timing analysis. design modifications for source-synchronous and system-synchronous interfaces
Use the Schematic and Hierarchy viewers to analyze and
cross-probe a design
Define a properly constrained design
Apply baseline constraints to determine if internal timing paths meet design timing objectives
Optimize HDL code to maximize the FPGA resources that are inferred and meet performance goals
Identify synchronous design techniques
Build resets into your system for optimum reliability and design speed
Increase performance by utilizing FPGA design techniques
Use Vivado Design Suite reports and utilities to full advantage, especially the Clock Interaction report
Perform clocking and static timing analysis (STA)
Analyze a timing report to identify how to center the clock in the data eye

Lab Description:

– Basic Design Analysis in the Vivado IDE
Outlines the various design analysis features in the Vivado Design Suite– Introduction to Clock Constraints|
Shows how to apply clock constraints and perform timing analysis.– I/O Constraints and Virtual Clocks
Covers applying I/O constraints and performing timing analysis– Timing Constraints Wizard
Reviews how use the Timing Constraints Wizard to apply missing timing constraints in a design– Introduction to Timing Exceptions
Introduces timing exception constraints and applying them to fine tune design timing– Source-Synchronous I/O Timing
Apply I/O delay constraints and perform static timing analysis for a source-synchronous, double data rate (DDR) interface.

– Timing Closure Using Physical Optimization Techniques
Use physical optimization techniques for timing closure

– Resets
Investigates the impact of using asynchronous resets in a design.

– Design Techniques – Baselining
Use recommended baselining procedures to progressively meet timing closure

– Design Techniques – Pipelining
Use pipelining to improve design performance

– Clock Domain Crossing (CDC) and Synchronization Circuits
Use synchronization circuits for clock domain crossings

– QoR Reports Overview
Describes what quality of result (QoR) is and how to analyze the QoR reports generated by the Vivado IDE

– Manipulating Design Properties Using Tcl
Query your design and make pin assignments by using various Tcl commands

Course Outline:

1.     Vivado Design Suite Non-Project Based Mode
Describes the design flow using non-project batch mode, including using design analysis commands and how constraints are managed in non-project mode2.     Vivado Design Suite Non-Project Mode
Create a design in the Vivado Design Suite non-project mode.3.     Introduction to Clock Constraints4.     Generated Clocks
Demonstrates using the report clock networks report to determine if there are any generated clocks in a design5.     I/O Constraints and Virtual Clocks6.     Timing Constraints Wizard

7. Static Timing Analysis (STA)
Describes the clock and its attributes, basics of clock gating, and static timing analysis (STA).

8. Setup and Hold Violation Analysis
Covers what setup and hold slack are and describes how to perform input/output setup and hold analysis

9. I/O Timing Scenarios
Overview of various I/O timing scenarios, such as source- and system-synchronous, direct/MMCM capture, and edge/center aligned data.

10. System-Synchronous I/O Timing
Apply I/O delay constraints and perform static timing analysis for a system-synchronous input interface.

11. Source-Synchronous I/O Timing

12. Timing Constraints Priority
Identify the priority of timing constraints.

13. Timing Closure Using Physical Optimization Techniques

14. Case Analysis
Understand how to analyze timing when using multiplexed clocks in a design

15. Synchronous Design Techniques
Introduces synchronous design techniques used in an FPGA design.

16. Resets

17. Register Duplication
Use register duplication to reduce high fanout nets in a design.

18. Design Techniques – Baselining

19. Design Techniques – Pipelining

20. Clock Domain Crossing (CDC) and Synchronization Circuits

21. Report Clock Interaction
Use the clock interaction report to identify interactions between clock domains

22. Report Datasheet
Use the datasheet report to find the optimal setup and hold margin for an I/O interface

23. QoR Reports Overview

24. Timing Constraints Editor
Introduces the timing constraints editor tool to create timing constraints.

25. Report Clock Networks
Use report clock networks to view the primary and generated clocks in a design.

26. Timing Summary Report
Use the post-implementation timing summary report to sign-off criteria for timing closure.

27. Clock Group Constraints
Apply clock group constraints for asynchronous clock domains.

28. Introduction to Timing Exceptions

29. Manipulating Design Properties Using Tcl

30. Congestion
Identifies congestion and addresses congestion issues

עיצוב FPGAs באמצעות Vivado Design Suite 3

Course overview

Level:

Who should attend?

Prerequisite:

Software Tools:

Skills Gained: After completing this training, you will be able to:

Lab Description:

Course Outline:

מעוניין.ת לשמוע עוד פרטים, דברו איתי

השיטה - לימוד מעמיק תוך תרגול מעשי

בקורס זה תלמדו את הנושאים החמים והמעודכנים ביותר בהתאם לצרכי התעשייה

בקורס זה תצברו ניסיון מעשי

כיתות קטנות ויחס אישי

קורס זה יאפשר לכם לענות לצורך ההולך והגדל של שוק הטכנולוגיה

בין לקוחותינו

מעוניין.ת לשמוע עוד פרטים, דברו איתי

דברו איתנו. על כל דבר. אנחנו יושבים במרכז שירות ויש לנו רק דבר אחד לעשות – לענות לכם על כל שאלה.

לוגטל מציגה את שילוב הכוחות המנצח בשבילך:

פיתוח אתר UD Studio • עיצוב- טרילוג׳י דיגיטל • כל הזכויות שמורות ללוגטל • התמונות באתר להמחשה בלבד • מערכי ועלויות הקורסים משתנים מעת לעת • ט.ל.ח